GermanLook Forums  

Go Back   GermanLook Forums > General > Project Builds

Reply
 
Thread Tools Display Modes
  #1  
Old November 23rd 2008, 04:05
owdlvr's Avatar
owdlvr owdlvr is offline
Administrator
 
Join Date: Sep 2008
Location: Canada - West Coast
Posts: 867
Those seats are inexpensive as they use a tubular-steel frame. I would highly recommend putting in a bar behind them to keep the seats from moving backward in the case of impact.

-Dave
__________________
'71 Type 1 - Rally Project
'58 Type 1 - I bought an early!?!
'73 Type 1 - Proper Germanlook project
'68 Type 1 - Interm German 'look' project
'75 Type 1 - Family Heirloom
'93 Chevy 3500 pickup - Cummins Swap
Reply With Quote
  #2  
Old November 23rd 2008, 10:47
chug_A_bug's Avatar
chug_A_bug chug_A_bug is offline
Registered User
 
Join Date: Apr 2006
Location: Canada, Ontario,
Posts: 1,179
Quote:
Originally Posted by owdlvr View Post
Those seats are inexpensive as they use a tubular-steel frame. I would highly recommend putting in a bar behind them to keep the seats from moving backward in the case of impact.

-Dave
Hey Dave thanks For the recommedtion, But I do have a Bar that Runs
Between the B pilars to Hang my Beats...

Chris.
__________________
74 Std. GL
08 Vw rabbit
18 WR250R
07 Chevy 3500 Dually
Reply With Quote
  #3  
Old November 24th 2008, 08:51
evilC's Avatar
evilC evilC is offline
Registered User
 
Join Date: Jun 2008
Location: UK Where Leics is more
Posts: 644
Quote:
Originally Posted by owdlvr View Post
Those seats are inexpensive as they use a tubular-steel frame. I would highly recommend putting in a bar behind them to keep the seats from moving backward in the case of impact.

-Dave
Dave, if the seat is going to move backwards then the thing won't be attached to anything so its almost pointless having a bar there! They are however, perfectly strong enough in bending so that the back won't separate from the squab. The Sparco Clubman Sprint tubular frame seat is bottom fixed so it can be attached to standard sliding rails that then have to be fitted to a tubular subframe to attach to the floor pan. IMO the standard bug floor pan is only just strong enough to cope with a seat subframe and even so would need big load spreading washers on the underside of the pan. The latest aftermarket pans are however, woefully thin and without substantial additional strengthening would not be srong enough in a severe accident. VW did very sensibly locate the seat fixings to the sides of the heater channel and tunnel that are very much stronger and therefore I have done the same with my seat installation. Also, with standard sliding rails I always weld a pair of small steel hoops around the rails to prevent catastrophic separation in an accident.

evilC
Reply With Quote
  #4  
Old December 5th 2008, 17:58
chug_A_bug's Avatar
chug_A_bug chug_A_bug is offline
Registered User
 
Join Date: Apr 2006
Location: Canada, Ontario,
Posts: 1,179
Hey guys just had the car out to take some Pics
and the White 72 Std is my Friends...








__________________
74 Std. GL
08 Vw rabbit
18 WR250R
07 Chevy 3500 Dually

Last edited by chug_A_bug; May 16th 2009 at 00:11.
Reply With Quote
  #5  
Old May 16th 2009, 00:14
chug_A_bug's Avatar
chug_A_bug chug_A_bug is offline
Registered User
 
Join Date: Apr 2006
Location: Canada, Ontario,
Posts: 1,179
Soo just a few things that I have Been up to this Spring...









will post more tomorrow
__________________
74 Std. GL
08 Vw rabbit
18 WR250R
07 Chevy 3500 Dually
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 14:27.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved