|
shad you have the ideal box for vw installation, ihave 2 cars with 915,s installed, 1303 with 1974 mag case 915- cut the rear mount off clearence the torsion tube a little, to sit the box back. concerning drive shafts this is what i did to overcome the problem. remove the 915 drive flanges , replace with 914 901,s not 911 901 flanges, use 914 cv gearbox end your type3/1 axels and type 3/1 cv,s brake end. or while your at it replace the brake end drive flanges with 944 (early arms) these are direct fit on i.r.s type 1 /3 this uprates to 944 cv or type2 cv which have the same inner size as your typ3 axels, you even have cable clutch i had to hydraulic mine cause it was push to release insted of pull on all vw,s, ialso have 1979 bug with 1986 3.2 911 915 box same install as 1303. all the best Lee L.A.P
|
January 22nd 2003, 08:49
Hybrid Mode
