|
I had to pull the injectors off to pull the motor but I'll probably put just the fuel system back on and fab up a test rig. the injectors were all brand new, balanced and tested from rc engineering. But since everything on the engine was new something could be in there blocking the flow. I'll double check the wiring but 1-2 fire together and since 2 was working I'm thinking the wiring is fine. I'm also not ruling out a spark issue... actually now that I'm thinking about it we were trying to time the engine on the dyno and a couple timing lights wouldn't work. A third finally did but it was spotty, so timing could definitely be part of it.
In other news I got the spare block back, turns out the didn't clean the case after machining and there was aluminum build up over the case savers. The deep stud hole by #3 was also filled with shavings. I still got to clean the case up more but re-assembly should happen soon.
|
July 29th 2009, 00:10
Threaded Mode