964 2pot rear calipers

[Steve C]

Hi

They are just stock 944 discs, I will do a proper measure if you need it tomorrow, its 11.30 pm here now, I don't want to make a noise, but it looks like the calliper would extend a little past the wheel mounting flange.

I have the Porsche parts system on my PC and it looks like the 7x16 Fuchs was the stock wheel on that model.

I have a 15 inch spare in the car and it just touches the calliper.

I bought these callipers locally, the work well, they have a 42 mm piston and on the front I'm using early Type 3 front callipers also use a 42 mm piston, its was just slightly over braked on the rear before I fitted a bias valve.

So what's an Aussie doing in Japan playing with VWs?

Steve