Quote:
Originally Posted by evilC
They should work if the Kersher adjustment is similar to the 944 struts. TBH I can't see why the adjustment should go off. Are you using the eccentric bolts or plain bolts? If you can a photo would be useful.
Clive
|
well the top hole where the coilovers bolt onto the spindal, the top hole is oblong so you can loosen it up and adjust camber then retighten. but somtimes under hard driving the bolt loosens causeing my camber to go all ape crap. Im using my og hardware. i was thinking the bolt i posted will like fill in the oblong hole and get rid of my problem.
February 25th 2010, 07:06
Threaded Mode