brembos on my square

[kombi211]

I have started adding a brembo brake upgrade on my squareback. 944 front hubs,993 front and rear rotors and brembo calipers from a 944t
I started the front as soon as I am done there will be moving to the back and doing a irs conversion and adding the alum arms from a 944,

hubs machined






bearing adapter and sleeve using vw inner and 944 outer


vw race installed


vw inner bearing and 944 outer bearing


test fitting hubs and rotors


test fitting calipers to see what i need to made for a adapter to mount them






used the mounting tab off of a set of 944 spindles just welded them to the stock vw spindles

[kombi211]

front is done now on to the rear

[Humble]

Looks great! How's the fit, any rubbing?

[kombi211]

Thanks everything fits nicely. the only rubbing i have is if i crank the wheels hard they tend to rub on the inner fender. but its not that bad. going to try spacing the wheels out a little more and see if that helps

[72marinablue]

Great idea welding the 944 caliper mounts to the stock spindles. Looks great!