Finaly worked on my car

[NO_H2O]

I have been working on tax stuff the last 2 days. But in between, I got my oil lines that will go to the front mounted oil cooler bent and flared. They are heavy walled -8 stainless so I had to take them to Aeroquip Express to have them flared.


I swapped out my carbs for another set of 45 Dells that fixed my remaining carb issues. I put another 30 minutes of run time on the engine and pull the lifters one more time to inspect them for proper break-in ware. 2 hours of run time on the test stand and 3 lifter inspections later and i am ready to fit some sealing tin to it and get it ready to stab in the car.