|
|
|
|
#1
May 7th 2010, 04:27
|
||||
|
||||
|
the first mounts i made for it out of 5mm alloy broke after about 10 miles of use i had to seruiosly beef them up. in the end i ran 8mm alloy mounts from the front bumper mount down and then a 25x25x5 alloy angle running the full width at the front. I could stand on it in with the new mounts
 first pic is what i had and the second is what i run now. I'm going to put a splitter on the new one as it worked so well on the old one.
__________________
my race car build galleryhttp://www.flickr.com/photos/1406263...7602662665607/ my web site www.rnjmotorsport.co.uk 
|
|
#2
May 7th 2010, 05:01
|
||||
|
||||
|
Rob, if you're getting a 25mm compression @ 75mph that equates to 260lb of downforce at your spring rates! That's very impressive for a bug.
One suggestion though - put a couple of castors under the splitter to stop it bottoming out. lol. Clive
|
 |
| Currently Active Users Viewing This Thread: 11 (0 members and 11 guests) | |
|
|
Hybrid Mode
