|
[QUOTE=Humble;79408].120 and I'm guessing 1.5" dia? Plenty strong for a beetle and it will probably be okay, but it looks like the main hoop leg was cut too short then re-welded in that first picture. Even if that's not the case it would never be approved officially because of that weld.
What you see there is a coupler that is with in the specs. Where the cage meets the fire wall there is 1/8 plate on both sides. We are going to be racing this car in the future and will find out what the tech inspector feels.
As for tying it into the supsension, no. That is why we went to the extents that we did to make it a structal part of the body. I'f you look over the chassis you'll find it uses our factory installed suspension set up.
Oh yea, I'm not offened I just don't want to undermine the thoughts of this over the top car in anyway. Hope you understand.......
Last edited by coolrydes; January 29th 2011 at 04:43.
|
January 29th 2011, 04:36
Threaded Mode