Mythbuster: continuing project thread of my 1303 '75

[spannermanager]

Hi Walter, was it the same cylinder/rocker as previously

[Wally]

Originally Posted by spannermanager

Hi Walter, was it the same cylinder/rocker as previously

No, same side though, but I think its unrelated. Previously both rockers failed simultaniously on cylinder 4, now it was the exhaust rocker on no. 3

Overboost is now set on 2.3 bar (3.3 PR) and ultimate rpm at 8K (soft cut at 7200), so I hope to never reach either