Ghia Wiring Thread

[owdlvr]

After reading the instruction book, here's what I think is going on: the Kwik Wire harness is setup for slightly more modern 1157 style bulbs. The brown wire (#29) is the common "tail light" wire, it provides the power for the running lights. The Green Wires #48, #56, are for the turn signals flashing lights. BUT, inside the fuse box they must also be relayed to provide the brake lights.

In an 1157 bulb there are two filiments. One is the lower wattage side (running lights) and the other one is the high wattage which is used for both brake lights and turn signals.

...I won't be able to sit down until early in the week, but I could probably make you a relay diagram you could use to make your 3-light ghia setup work.

-Dave