|
|
|
|
#1
November 29th 2011, 12:55
|
||||
|
||||
|
No cutting is not possible IMO. As a minimum you will need to cut for a radiator. I believe you could be careful and not detrimentally affect the external paint job if using a twin cam engine...
__________________
http://www.ricola.co.uk 
|
|
#2
November 30th 2011, 01:35
|
||||
|
||||
|
Agreed, I waited 6 months before I touched up any paintwork on mine around the radiator intake and rear apron.
The SOHC engines from EJ22 and smaller fit with no bodywork except a peice of the seal channel on the apron cut either side. A removable apron makes life alot easier though, again I did mine with no welding, and I didn't paint anything till 6 months later. What model bug is it?
__________________
1974 Germanlook 1303 SUBA-beetle Subaru EJ254, BoostR 17", topline suspension, 4 wheel discs and A/C
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
