CNC made aluminum Uniball rear suspension system

[-Alex-]

Shipping costs are:

1. Sweden, Denmark, Germany and Estonia 28 euros

2. Spain, UK, Ireland, Italy, Austria, Greek, Poland, Portugal and France 40 euros.

3. Usa, Kanada, Iceland, Canary Islands, Norway, Switzerland and Russia 56 euros

4. Australia, Japan, China, Hong-kong, Thailand, other Asian destinations and New Zealand 65 euros

[-Alex-]

This kit is specially made for volksmeister, feels kinda tougher than remmele one, but actually lighter because its fully made out of 7075 aluminum.

[Wally]

Very nice!

[-Alex-]

Second set i am making for 944 aluarms. SInce making these from 7075, it can be made little slimmer and lighter than using 6082/S355 materials.

[Obiwan]

One 7075 set ordered

[-Alex-]

Now there might be possibility to get these anodized to black or grey. I have to ask the price.


Obiwans set will be ready littlebit later, due to machinist making his own parts for drag race event.

Uniball kit has same price until july, because after that my machinist goes to china for few months. After then price may rise 50-100 euros for few months, because i have to use another machinist.

[volksmeister]

Finally mocked up the uniball that Alex has made..
Everything looks cherry so far except that the damn early shock tower design doesn't give much top clearance.. I estimate around 2.5" travel before the top bolt on the uniball bracket would hit the underside of the shock tower.. I would have to probably swap out that bolt for a countersunk one or something..

http://img4.imageshack.us/img4/4050/p1060085copy.jpg

http://img853.imageshack.us/img853/2...060095copy.jpg