CNC made aluminum Uniball rear suspension system

[kendy]

What kind of alu do you use? 7075 or 2017A?

[-Alex-]

I use 7075-T6 only.

[Humble]

Is it too late to snap up that incomplete uniball set? I need it for 944T aluminum arms and correct me if i'm wrong but these will work with the stock porsche swaybay pckups that go through the arm and spring plate? PM with billing details

[jmd]

Humble,

I'm running your setup and am curious about what you're getting up to?
I am building my own uni's at the moment and would love to know how you're planning on using these parts?

more info?

[-Alex-]

Who? Me? Humble?

What you want to know?

[Humble]

jmd, I'm after few things really.

1. I'm looking for more adjustability out of the back end than I'm getting from the stock porche spring plates. It's also a pain to fine tune with the eccentric adjustment bolts.

2. I want to cut down on the rear end slop now that I'm playing with the much higher cornering loads that slicks produce. These plates and delrin pivot bushings should help with that.

3. I like giving back to the community where I can and getting suspension parts from members puts money into GLer hands.


If you aren't making a time attack car the stock parts are great. Even for intermediate track use on street tires they will hold up just fine. I'm at the stage now where I'm trying to go from the top 8% to the top 5% and I need reliability and repeatability.

[-Alex-]

I am now offering bus kits also

[petevw]

Originally Posted by Humble

Is it too late to snap up that incomplete uniball set? I need it for 944T aluminum arms and correct me if i'm wrong but these will work with the stock porsche swaybay pckups that go through the arm and spring plate? PM with billing details

Have any pics of where and how these swaybars mount?

[Humble]

Here's a pic I took earlier, I can try and grab a better one from the backside later.