Break bias with NA 944 rears

[pig-pen]

i'm going to hijack this thread as no one is listening on mine

so.... if I fit 944NA on the back of my oval, then a simple ghia disc and caliper set up up front would work best???

I have the 944NA fronts, but it seems as if they will not work. too much power.

I don't want to get into bigger calipers the rear, as I need to run 15" wheels. I am assuming of course that 944NA will work with 15" rims????

I see the drop spindles advertised for king and link beams with disc fitting, so do these just allow me to bolt up standard (drilled for 5x130) 66- discs and calipers?


Please help!

M

[super71beetle]

What I've figured after doing some calculations is that the ghia front and 944 rear setup like I've got is good, but just a hair rear biased so next time I come home from college I'm going to research the proportioning valve so I can reduce the rear just enough to make it perfect. I have no experience with the front conversion and I don't imagine I will in the near future because I would only go turbo for those badass looking calipers. Good luck sir !!