Vw 1300 72'

[-Alex-]

I asked more about the heads, valves etc and how they flow etc. If i am correct at calculations, he has over 245 engine hp

(215/87)x100=247

Hello Alex,

if it´s possible to get 240cfm / 25", I don´t know (but I think so).....all I can say is, that my current motor have 215HP at 6300rpm and 271Nm at the Wheels!!!!!!

It´s an 2,7l WBX with my heads (46x39), an 328° german cam, twin spark, 50mm throttle bodys, and 45mm CSP Python.

In this time I´m build an 2,8l (86x101,6) and my heads (48x39).
I think into 4 weeks the head comes on the flow bench and than we see how good it´s flow with the 48mm intake......

If you want, I can produce your heads without the O-ring seals!! So you can port much as you want....