915 shifth rod coupler?

[T5WOB]

hi i just fitted bug @5 speed set up .up have to cut the beetle rod .but vw made 3 different laths . i could not find out how much to cut out .its trail fit .i used the bug at 5speed shifter .dont think any thing works .there is lots of info on bug 5speed site .hope this helps regards martin .
martin.vw@btinternet.com

[T5WOB]

http://www.bugat5speed.de/en/projekt...ng-bug-5-speed

[dub_crazee]

I used the beetle rod and coupling. With both the box and the rod is situe, and the coupling on the gearbox, you can figure out how much you need to shorten it by. I also shortened the rod out of the gearbox and redrilled the dimple. After I did this I decided the porsche coupling was better as it has adjustment so I spliced the beetle rod with the porsche one! There are some pics on my build thread
Good luck

[T5WOB]

dub_crazee how do you find 1st to 2nd gear .i finding it hard to find 2nd gear . any info would be good thanks .