#31
|
|||
|
|||
Mild progress. Working out the design features:
-fixed positive caster gain. Question is how much? I'd appreciate feedback. Walter? Steve C? -I'll design for max camber adjustment. 2 bolt struts will have more since the hole in body is bigger. On early cars its up to your discretion to clearance body. -looks that there will be very little change in ride height..+- 4mm -can be removed/replaced without affecting setting -easily adjusted from under hood -will be non cushion mounted for now; good for the racers, a little harsher for daily drivers Lanner Last edited by flat; July 24th 2013 at 07:00. |
#32
|
||||
|
||||
Lanner, I'm not sure if you have anyone lined up yet, but I have access to a large manufacturing/machining company through a couple of friends. They do everything from medical devices to paint ball guns and they are looking for more work. If you can get me a design and materials bill I can get an run estimate and materials/machining cost. That would leave only hardware left to be fitted for something like what riseabove has done.
|
#33
|
|||
|
|||
Humble, I do my own manufacturing (manual mill, lathe etc) and considering the tiny niche market I don't think I'd require external vendors.
Got the aurora spherical bearings on order so she's slowly coming together. I'm designing for seals under the spherical to keep road crap out. Lanner |
#34
|
||||
|
||||
Hi
I'm running non cushioned mounts, they are not as bad as I thought that they would be. I will try to find my specs on caster. I had to fit these to correct an over wheel base issue that I had with my local authorities, I was 30 mm over wheel base which the local authorities got their knickers in a twist over. I'm running a stock 02/03 sway bar with offset camber bushes. These fitted back to front with the camber tops removed the excess wheel base problem. After the car passed inspection I fitted the cambers bushes back to the normal. Steve
__________________
STI powered 1303 in the works. |
#35
|
||||
|
||||
Lanner how long do you think before you can ship something? I am even open for a test set purchase.
__________________
Meyers Manx Signature #85 , 79 Convert |
#36
|
||||
|
||||
A call for camber plates
Doh sorry Lanner I've just read through this thread properly and realised your trying to put your own camber plates together.Apologies for posting a link to someone else's products,not trying to piss on ya strawberry patch.Good luck with getting them sorted
__________________
gee dub |
#37
|
||||
|
||||
Lanner? Anybody? Still looking...
__________________
Meyers Manx Signature #85 , 79 Convert |
#38
|
||||
|
||||
Hey I am also interested in this project, I'll be keeping my eye one it!
|
#39
|
||||
|
||||
OK let's look at a score card.
Lanner did not have anything after months so I decided to quit bugging him. RiseAbove said just PM them and we could get some quality Swedish units. Never returned PMs... K-Mac after several calls, emails etc said sure we can ship them for $480. Paypal us and we will ship them. So 6 weeks ago I Paypal'd them and have seen nothing. Now not even a return email on when or if they shipped. Why does it have to be so hard to buy damn near anything that is Beetle related? If I didn't own my Super for 20+ years I would run from the VW world of slow vendors...
__________________
Meyers Manx Signature #85 , 79 Convert |
#40
|
|||
|
|||
That is a shame, maybe one of us Aussies (Steve C or myself) should call K-Mac and chase your order
__________________
aka VWCOOL '56 Cal Oval with IRS and a 1916 '68 Country Buggy. '76 fuel injected Cabriolet ..and a good ol' Aussie V8 |
#41
|
||||
|
||||
If I can get a design, I can get a batch done through a friend's manufacturing facility. I don't have the time or knowledge to design them myself but I can get small production runs completed.
|
#42
|
||||
|
||||
Further report. So in total fairness to K-Mac they did respond and it was in my Spam folder that I never look in. But now the problem is they shipped them TNT shipping (?) who lost them and now K-Mac says they are building me another set. Dear God let my next project car be something that I can buy every part from Summit...
__________________
Meyers Manx Signature #85 , 79 Convert |
#43
|
|||
|
|||
Finally!
Approx 2 degrees positive caster gain Approx 1 degree camber adjust either way Camber adjust properly aligned on chassis Adjust from under the hood Aurora spherical bearing Sealed bearing underneath to keep out the elements Details to follow Lanner |
#44
|
||||
|
||||
Here is a look at the KMacs. Looks like camber changes will come with caster changes. Will reserve judgment until I try to make them work. Cast center section, I nestled the two together to show the cuts. Captive bolts for squeeze factor. Thrust bearing held in with C clip. Funny the box says you can change your Caster/Camber in only 30 minutes. We shall see!
__________________
Meyers Manx Signature #85 , 79 Convert |
#45
|
|||
|
|||
yeah it all seems loose now, but when it is all in the car, you can 'lever' the plate fore and aft and side to side for camber and caster adjustment
__________________
aka VWCOOL '56 Cal Oval with IRS and a 1916 '68 Country Buggy. '76 fuel injected Cabriolet ..and a good ol' Aussie V8 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|