Mythbuster: continuing project thread of my 1303 '75 - Page 94

70Turbobug · #**1396** November 25th 2014, 15:09

I see you're sporting some semi slicks there! Looking good Wally,hope to see you again in Spa next year, maybe sooner!

Wally · #**1397** March 7th 2015, 14:41

Today I send out a big box for some extremely important work (installing seats, guides and maching the ti valves to fit

containing these (mine and a friend of mine's):

Steve C · #**1398** March 8th 2015, 08:28

nice that will wake your motor up, not that it lacked power anyway

70Turbobug · #**1399** March 9th 2015, 01:18

Looks great Wally!

-Alex- · #**1400** March 9th 2015, 11:19

I am waiting same thing to get done, probably around at next fall i will send my Mr. Pieper billet heads to get done

What length those KONI's are?

-Alex

Quote:

Originally Posted by Wally

Today I send out a big box for some extremely important work (installing seats, guides and maching the ti valves to fit

containing these (mine and a friend of mine's):

Wally · #**1401** March 23rd 2015, 03:01

Alex, the Koni's are 944 parts, so they have those length, I haven't measured that. I ran Koni yellow 944 shocks before.

Work has started already!

Very high quality guides ^^

Valve size will be 48x41 and that in just a 98mm bore...

effvee · #**1402** March 23rd 2015, 10:33

Nice eye candy Walter

Wally · #**1403** March 23rd 2015, 15:54

Alu-bronze seats have been made:

70Turbobug · #**1404** March 24th 2015, 11:46

Nice! Jacob does good machine work! I like how Thorsten did the rockerbox ventilation.

Wally · #**1405** March 25th 2015, 17:22

70Turbobug · #**1406** March 25th 2015, 17:31

Looks great! What will your valve size be?

graham · #**1407** March 26th 2015, 01:47

I'm surprised to see you fitting cheap Chinese aftermarket parts to your car Walter

.

Lol,As always impressive stuff going on here. It never ceases to amaze me the amount of expertiese and craftsmanship some people are capable of producing.

.

effvee · #**1408** March 26th 2015, 08:52

Quote:

Originally Posted by Wally

Man, that CNC technology, wow that's just so nice

effvee · #**1409** March 26th 2015, 12:23

Quote:

Originally Posted by effvee

Man, that CNC technology, wow that's just so nice

Question, I note that you are at the stud holes, what's the max cylinder size those heads can go up to?

Wally · #**1410** March 26th 2015, 14:40

Mark, my valve size (remember mine is just a 98mm bore engine) will be 48x41. Nigel's engine (103x82, as you see in the above pics) has 50x41mm valves.

Francelle, these have stock type 4 pattern and size holes, so what you think is smart/safe to use as a max bore size is entirely up to you. same goes for valve size..

Currently Active Users Viewing This Thread: 24 (0 members and 24 guests)