Building a German Look - Thoughts in one place

Steve C · #1 October 2nd 2020, 20:02

I had a 930 pattern flange welded to my stub axles, this moved the flange inward slightly, its tight but they do fit, couldn't find a photo but I'm fitting drag radial this afternoon so I will try to remember to take a photo when the wheels are off

Steve C · #2 October 5th 2020, 02:17

some photos of 930 CVs in 944 arms and my modified stub axles

DORIGTT · #3 October 5th 2020, 04:40

I went the opposite way Steve. I had my 108mm inner flanges modified to accept 100mm CV's so I could use 944T axles.

Steve C · #4 October 5th 2020, 16:52

Quote:

Originally Posted by DORIGTT

I went the opposite way Steve. I had my 108mm inner flanges modified to accept 100mm CV's so I could use 944T axles.

I needed the extra operation angle that the 930 CVs give

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)