My subaru 1302 build thread

[Humble]

I'd be worried about the tranny at 18psi, hell even Jack's killed a few with light boost Are you using Albins/Weddle gears?

[Eatoniashoprat]

Originally Posted by Humble

I'd be worried about the tranny at 18psi, hell even Jack's killed a few with light boost Are you using Albins/Weddle gears?

1,2 gears are stock, 3,4 are coarse tooth bus gears (late splined 3-4 shift hub that uses factory 002 gears). These gears have the syncro hub welded to the gear from the factory.

Ratios are 3.78, 2.06, 1.26, .82

944 CV's

The tranny is the late 'zig-zag' case with the extra ribs on the top. I won't be running slicks on it, and if I do they will be small (7") so I'm not too worried about gears breaking.

Tranny life will depend on traction (shockload) and sometimes moreso the guy behind the wheel. I'm not one to dump the clutch or anything so I'm confident it will stay together. We'll find out!!

I just remembered theres a guy on the samba with a +400hp turbo'd honda motor and last I checked his trans was still alive.