The last bit of the intake puzzle coming together. Had to go with the pie cuts for........ consistency sake with the rest of the build
s
I made a fitting that slips over the MAF with a very nice interference fit, and welded the tubing to the inside to start the piping. Everything is tacked together but I ran out of argon over the holiday weekend so I'll have to finish next week
. The tubing will get a silicone coupler to mate up with the throttle body. You can see the welding wire I bent at the same curvature as the decklid so I could guarantee fitment.
Happy New Year!
January 1st 2018, 13:50
Threaded Mode