|
|
#2
November 19th 2003, 15:28
|
||||
|
||||
|
The backing plate... I got stock Ghia backing plates, and welded some 2.25" exhaust tubing to them, then I cut the holes. I used
some 2.5" silicone hose from Racers Wholesale to connect the scoop to the plate. The scoop is the inner fenderwell air intake from a 88 escort gt. I just pop riveted them on. No more fade. Yeah I know my rotors aren't cross drilled, but it still definitly helps brake temps when zooming in and out of traffic. 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Threaded Mode