|
|
|
|
#1
April 27th 2009, 17:54
|
||||
|
||||
|
Hey Dave, what did you guys end up doing to mount the pedal assembly? I talked with you over the phone but I never got to see the finished results. The tilton 600 (and similar assemblies) are by far my favorite and I can't wait to get mine in the new chassis.
__________________
Lucy: 73 super beetle sport bug edition, 944 turbo suspension, 930 turbo brakes, 2165 FI, dry sump, turbo 
|
|
#2
April 27th 2009, 20:34
|
||||
|
||||
|
If you can see in the pic, we raised the flood with .080 2024 t-3 and some spacers on the mounting bolts. The rods were extended thru the bulkhead (holes cut and spacers inserted) the M/C's are on the forward side of the bulkhead. a flat sheet of .100 2024 t-3 is on the bottom side of the pan. Bolts thru all layers stiffen things up nicely. It took a while to get it all in the way we wanted to but the end result made the owner very happy. The Tilton techs got the M/C size selection right on the money. We put the bias bar right in the middle and tested it in the parking lot of the owners building and never touched it again.
I want a set in my car some day.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
