ej20t 1303 project

[vw1303]

I have nearly my entire spare well cut out so I think there is lots of room for the hot air to go. But time will tell I guess.
A little more progress.

Got my ECU.

Starting stripping the original wiring harness. The manual from EMS is quite vague so I have alot of work to do in the wiring department.

Coolant pipes are all welded and beadrolled. I have all my clamps and hose couplers. Started laying out the fuel system. Bosch 044 being fed by a Facet low pressure pump through a surge pot and out to the injectors. I am going to mount the fuel pump at the back of the spare tire well using some leftover 2.5" silicone couplers and clamps to reduce vibration. The surge pot is going to go next to the driver side front strut.

Stage III Pressure Plate and Clutch is arriving today and so is Innovative wideband.