Mythbuster: continuing project thread of my 1303 '75

[Steve Arndt]

I missed the details Wally. How are you running 930 and T2 on the same axle? The splines are different. I inquired years ago to Sway A Way if they would build me a set like that and they said no way.

[Wally]

Originally Posted by Steve Arndt

I missed the details Wally. How are you running 930 and T2 on the same axle? The splines are different. I inquired years ago to Sway A Way if they would build me a set like that and they said no way.

I don't.. I run the front 964 flanges which have 100mm CV size and fit the G50 as a glove. So I still run 100mm on both sides, just with the simple VW spline.
The axles and CV's are still exactly the same as I ran them on the 915

[Wally]

Engine finally in after I was able to lend a 930/G50 shaft to align the dual plates..

FYI, type 1, 915 and 930/G50 splines next to each other...Guess which is strongest

[dave forder]

Hi Wally,
You know what, I wish I had gone for the G50 box way back when the chassis was being done. We will wait and see. It is a hell of a lot of work to get everything out if I break something. I have got some real tasty pictures from John Maher of my engine but can't get them to upload onto the site. Any ideas?