79 Convert Kaefer

[70Turbobug]

That would be the ideal solution, but that´s going to be a tight fit under the apron and to be honest,I don´t believe there will be enough room. That´s basically the same idea I had,but after measuring and comparing on another bug in my shop....there´s no way to do it and keep it under the apron and decklid. You may have to relocate your intercooler from it´s present position also if it is going to fit under the decklid. The cam wheel cover on the DOHC suby takes up quite bit and makes it longer than a type 4. You could move the trans/motor package forward a couple of inches requiring you to cut the torsion tube and the frame horn. Even then it will be real tight.

Mark